Profile

Join date: Aug 3, 2022

About

Vickers V10/V20 Series Double Vaned Double suction pumps

The V10 and V20 double suction pumps are designed to exceed the performance requirements of

The V10 and V20 double suction pumps are designed to exceed the performance requirements of EN958:2002, ISO2858:2003 and API 682:2007.

These pumps offer a number of benefits over single suction pumps including:

Flexibility - For easy installation on any skid or base plate, the V10/V20 can be supplied with either an integral or remote mounted control panel. The V20 can also be supplied with a remote mounted control panel plus an optional expansion tank. This enables the pump to be sited away from the process piping, if required.

Reliability - Both models have been designed with a high level of redundancy to ensure that they continue to operate in the event of failure of one or both impellers or seals etc..

Performance - The V10/V20 are capable of handling flow rates up to 30m³/h at pressures up to 25 bar (3,000 psi). Both models have been designed for use in applications where high temperature fluids such as water/glycol mixtures must be handled. A wide range of options are available for use in applications where specific chemical compatibility is required.

ISO 2858 and ISO 5199 in the majority of petrochemical, industrial and commercial service applications.

Vickers V10/V20 Series Double Vaned Double suction pumps are designed for use in the most demanding applications. The double vaned impeller, long life wear resistant cast iron pump body and large diameter bearings ensure reliable operation with minimal maintenance.

The V10/V20 Series Double Vaned Double suction pumps are suitable for a wide range of petrochemical, industrial and commercial service applications such as water treatment plants, refineries and chemical processing plants. The double suction design allows the use of larger diameter bearings which reduces the number of seals required in the pump reducing the potential for leakage and improving reliability.

The V10/V20 has been developed using ISO 2858 and ISO 5199 in the majority of petrochemical, industrial and commercial service applications. This standard covers all aspects of design, manufacture and testing including endurance tests which simulate 50 years' operating life at 100% duty cycle (i.e. no down time or maintenance).

These pumps are available with a variety of impeller designs, stages and materials of construction.

The Vickers V10/V20 Series Double Vaned Double suction pumps are designed for use in the food, beverage and chemical industries. These pumps are available with a variety of impeller designs, stages and materials of construction to meet the requirements of customers. The double vaned impellers provide high efficiency at low speeds and have been proven over many years to be very reliable in continuous use.

The V10/V20 Series Suction Pumps are designed for liquids that are corrosive or contain solid particles. They have been used extensively in the food, beverage and chemical industries for more than 20 years.

The double-vane design provides high efficiency at low speeds and has been proven over many years to be very reliable in continuous use. The double vaned pump does not require any special maintenance other than routine inspection for wear or damage which will cause leakage past the seals into the motor housing area resulting in overheating due to high load on bearings caused by liquid leakage into motor housing area (casing).https://topkitparts.com/v10-v20-series-double-vane-pumps/

薛琪

More actions